SDM Super Sights
View 3D Solid model
Specs. :
.125" wide  P models are .930" long , C models are 1" long
Heights :
Pinned in model .250" &  .300" high
Classic & DX model .250" & .300" high
Blanks are wire edm cut from Starret ground flat stock
with 50 lpi serrations on face

Be sure and measure your existing sight height.

Any Change you make to the front you will have to make to the rear.

If you replace a .278" with a .300" you will need to raise the rear .022"

or

If you replace a .278" with a .250" you will need to lower the rear .028"


Make sure you have enough adjustment on the rear sight for these situations.

 
 

ORDER HERE

BACK